Does your heating system need topping up?

Here’s a quick guide to refill your system:

• Make sure the boiler is switched off and the system is cool.
• The hose will have a valve at both ends – make sure both ends of the hose are securely attached to both valves.
• The valves can be opened either by tap handles, or by using a flat headed screwdriver.
• Open both valves to allow the cold mains water into the system.
• You should hear water filling the system.
• Keep an eye on the pressure gauge until it reaches 1.5bar, then close off both valves, one after the other.

Once the pressure is at the required level, switch the boiler back on and (if required) reset the boiler.

(More information can be found at corgi.co.uk)